Seco-Larm E-931CS22RFCQ Wireless Weatherproof Entry Alert System For Monitoring a Driveway or Use as an Entrance Indicator, Up to 22 Feet Sensing Range, Up to 328 Feet Wireless Transmission Range
The ENFORCER Wireless Entry Alert System is a self-contained esy-to-install alert system for commercial or home applications. Each set contains a reflective photoelectric beam sensor that, when tripped, communicates wirelessly with a speaker installed up to 328 feet away
Key Features
Ideal for monitoring a driveway or use as an entrance indicator
No wiring required between the sensor and speaker; when tripped, the sensor wirelessly transmits to any programmed speaker
Weatherproof IR photoelectric beam sensor for outdoor use
Speaker makes "ding-dong" or siren sound if beam is interrupted
Speaker volume can be adjusted or turned off
When in siren mode, alarm time is adjustable from 3 to 30 seconds
Additional speakers can be connected to the sensor wirelessly (only one speaker included)
Kit includes weatherproof wireless reflective sensor (Tx), wireless speaker (Rx), reflector, two power adapters and three mounting brackets (one each for the sensor, reflector, and speaker)
Specifications
Sensor and Speaker operate at 12VDC (120VAC to 12VDC adapter included)
433.92 MHz Operating frequency
Sensor and Speaker operate at 12VDC (adapter included)
Sensing range up to 22 feet(7m)
Wireless transmission range up to 328 feet (100m)
Sensor dimensions 3-1/4" x 2-9/16" x 1-1/2"
Speaker dimensions 3-1/4" x 2-15/16" x 1-9/16"
Reflector dimensions 2-3/8" x 2-1/16" x 3/8"
Sensor draws 20mA when active
Sensor standby mode draws 5mA
Speaker draws 100mA when active, 25mA in standby mode
IR LED Light source
0 to 90 dB Speaker volume
Alarm Time Range from 3to 30 seconds (Adjustable)
Chime, off and alarm sound (selectable)
Operating Temp 32F-122F
If unit doesn't seem to work, call Seco-Larm Tech support at (800) 662-0800
