Seco-Larm E-931-S50RRGQ Reflective Photoelectric Beam Sensor, Up to 50ft (15m) Sensing Range, Weatherproof (IP55) Construction for Indoor/Outdoor
The Seco-Larm E-931-S50RRGQ is a reflective photoelectric beam sensor with a range of 50ft
The sensor is ETL UL325 compliant and is designed for outdoor gates, garage and overhead doors, etc
Key Features:
- For outdoor gates, garage doors
- Weatherproof IP55 construction for indoor/outdoor use.
- Anti-condensation housing.
- Dual-color LED alignment system.
- 3.25" - 82mm Round reflector included.
- Compact size
Specifications:
| Type |
Reflective photoelectric beam sensor |
| Sensing Range |
Up to 50' (15m) |
| Current Draw |
Standby - 55mA at 12VDC, Active - 40mA at 12VDC |
| Operating Voltage |
12-30V DC/AC 60Hz, 100mA |
| Response Time |
10ms |
| Form C relay |
500mA at 30VAC/VDC. |
| Tamper switch |
N.C. 500mA at 30VAC/VDC. |
| Monitored output |
N.C., 10kohm Resistor |
| Light Source |
IR LED |
| LEDs |
Alternating Flash - Poor beam signal |
| LEDs - Red |
Solid, No beam signal, triggered |
| LEDs - Green |
Solid, Good beam signal, properly aligned |
| Alarm Output |
SPDT relay output (NO/NC/COM) |
| Switching Capacity |
500mA at 30VAC/VDC, |
| Tamper Switch |
500mA at 30VAC/VDC |
| Enclosure |
IP55 |
| Operating Temperature |
-13º~140º F (-25º~60º C) |
