Product Overview
Intimus 175 CP4 High‑Volume 50‑Sheet Cross‑Cut Shredder
The Intimus 175 CP4 is a robust high-volume cross-cut shredder designed for large offices and departments. With a rapid shredding capacity of up to 50 sheets per pass (~1,100 sheets/min), a spacious 46-gallon bin, wide 16″ feed, and smart i-Control interface, it ensures secure, efficient, and quiet document disposal while accommodating diverse media and meeting P‑4 security standards.
Key Features ▼
- High Performance — Shreds up to 50 sheets per pass and 1,110 sheets per minute.
- Secure Cross-Cut — 4 × 40 mm particle size meeting P‑4 (DIN 66399) security.
- Multi-Media Capable — Handles staples, paper clips, credit cards, CDs/DVDs, floppy disks, and foil.
- Smart Operation — i-Control panel with auto-start/stop, auto-reverse, bin-full, jam alerts, Dynamic Load Sensor (DLS)
- Built for Convenience — 46-gallon sealed wooden bin, mounted on casters; optional auto-oiler; low noise (~54 dB).
Specifications ▼
- Model Number: 175 CP4
- Manufacturer Part Number: 297134 (US) / 297131 (EU)
- Cut Type / Size: Cross‑cut, 4 × 40 mm (5/32″ × 1 3/16″)
- Security Level: DIN 66399 P‑4 / F‑1 / T‑4
- Sheet Capacity: 38–50 sheets (80 g/m²)
- Shredding Speed: 6 m/min (19.7 ft/min)
- Throughput: Up to 1,110 sheets/min
- Feed Opening: 405 mm / 16″
- Bin Capacity: 175 L / 46.2 gal
- Waste Bin Type: Removable sealed wooden cabinet with casters
- Media Accepted: Paper, staples, paper clips, credit cards, CDs/DVDs, floppy disks, foil
- Smart Features: Auto start/stop, auto-reverse, bin-full sensor, DLS overload sensor, jam and overheating protection, automatic shutoff after 15 min idle, optional automatic oiler
- Noise Level: ~54 dB(A)
- Electrical: 120 V/60 Hz/20 A (US); 230 V/50 Hz (EU)
- Power Consumption: 1,100 W
- Continuous Run: Yes, capacitor motor
- Dimensions (W×D×H): 26″ × 22.25″ × 41.5″ (66 × 56 × 105 cm)
- Weight: 198 lb / 90 kg
- Country of Manufacture: Germany
- Certifications: CE, UKCA, HIPAA, TAA
Warranty Information
"
Warranty is covered by the manufacturer
Please see:
"
